Our product portfolio includes automatic loading/unloading machines, palletizers, and board sorting systems, designed for materials like stone, aluminum, concrete, and wood, with advanced features such as multi-axis control and visual recognition.
The small stone slab loading and unloading machine developed by Ledrobit is an automated material transfer solution built to link stone cutting saws with downstream processing lines. Featuring a dual-arm mechanism—utilizing a vacuum suction arm for thin pieces (<50 mm) and a mechanical clamp arm for thick pieces (>50 mm)—it effortlessly handles workpieces from 20 mm to 100 mm in thickness.
Small Stone Slab Loading and Unloading Machine - Ledrobit
Designed to eliminate manual handling bottlenecks in high-volume stone cutting plants, the Ledrobit small stone slab loading and unloading machine bridges primary sawing with finishing, calibration, or packing operations. By automating full-layer transfers up to 1200 × 800 mm and incorporating dual gripping heads tailored for varying slab profiles, this system maximizes line uptime, prevents manual breakage of small tiles, and ensures precise, synchronized material flow across the entire factory floor.
This machine handles small-format stone slabs and transfers them onto a processing line. It can also move and stack a full layer of slabs. Designed for automated stone slab cutting lines, the small stone slab loading and unloading machine includes a belt conveyor frame to support continuous transfer between the machine and the production line, reducing manual handling.
Dual-Arm Gripping for Diverse Thicknesses
The machine uses two arms with different gripping methods:
· The suction-cup arm handles thin slabs under 50 mm thick.
· The clamp arm handles slabs over 50 mm thick.
· The minimum single slab size is 100 × 100 mm, and the supported thickness range is 20–100 mm. The machine can transfer a full layer measuring 1200 × 800 mm.
High-Precision Servo System and Cycle Speed
Servo motors provide the machine’s primary drive. Positioning accuracy reaches 0.2 mm. Each cycle takes approximately 30 seconds; actual cycle time depends on slab size, handling method and production conditions.
Technical Specifications and Physical Footprint
Item
Specification
Application
Small-format stone slabs
Minimum single slab size
100 × 100 mm
Slab thickness
20–100 mm
Handling system
Suction-cup arm and clamp arm
Suction-cup arm
Slabs under 50 mm thick
Clamp arm
Slabs over 50 mm thick
Full-layer size
1200 × 800 mm
Positioning accuracy
Up to 0.2 mm
Cycle time
Approx. 30 seconds per cycle
Main drive
Servo motors
Conveyor
Belt conveyor frame
Machine dimensions
6000 × 2300 × 2600 mm
The small stone slab loading and unloading machine feeds small stone slabs to processing lines and transfers full layers, helping reduce manual handling and keep cutting-line operations moving. Contact us to discuss an automated loading and unloading solution for your stone slab cutting line.
Frequently Asked Questions
How does this equipment protect fragile natural stone tiles from corner chipping during transfer?
The combination of soft rubber vacuum cups for thin tiles, rubber-padded mechanical clamps for thick slabs, and smooth servo acceleration curves ensures soft landing and gentle gripping, eliminating shock impacts that cause micro-fractures.
Can the belt conveyor frame speed be synchronized with existing multi-blade cutter outfeeds?
Yes, the integrated PLC system allows complete speed synchronization with upstream multi-blade bridge saws or downstream calibration lines, preventing material backup or conveyor jams.
What maintenance steps are required for the dual gripping arm mechanisms?
Routine maintenance involves weekly cleaning of the suction cup surfaces to remove stone dust, inspecting pneumatic vacuum lines, and periodically checking linear guide rail lubrication to maintain 0.2 mm positioning precision.
How does full-layer handling reduce overall labor requirements in tile production?
By transferring entire 1200 × 800 mm tile arrays simultaneously instead of moving pieces one by one, a single operator can oversee the entire transfer zone, cutting manual labor demand on the line by up to 80%.
What compressed air and power connections must be prepared before site installation?
Facilities need to prepare a standard 3-phase power drop to run the servo drives, alongside a clean, dry compressed air supply (0.6–0.8 MPa) to operate the pneumatic vacuum generators and clamp actuators.
Optimize Factory Automation with Ledrobit
Ledrobit provides high-efficiency stone machinery and automated handling systems engineered for modern quarries and processing plants worldwide. Contact our engineering consultants today to discuss your production line specifications and discover how a custom small stone slab loading and unloading machine can streamline your processing line.
Get a Tailored Quote for Your Production Line
What We Can Help With:
Custom equipment design — Based on your material characteristics and factory layout.
Production line integration — Connect key processes and reduce manual handling.
OEM/ODM projects — Provide drawings or requirements, and we manufacture to your specifications.
After-sales support — Installation, commissioning, training, and spare parts.
We respond to every inquiry within 24 hours. No pressure, just practical advice from engineers who understand industrial automation. Complete the form below and our team will get back to you with a custom solution.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy